Test Information:
Total Questions: 188
Test Number: 642-742
Vendor Name: Cisco
Cert Name: CCNP Wireless
Test Name: CCNP Wireless - IUWVN
Official Site: http://www.certsgrade.com
For
More Details: http://www.certsgrade.com/pdf/642-742/
Version:
11.0
Question: 1
Which
three options are benefits of U-APSD? (Choose three.)
A.
synchronization of the transmission and reception of voice frames
B.
bandwidth reservation
C.
optimized power-save mode periods
D.
increased call capacity
E.
priority bandwidth and polling
Answer: A,C,D
Question: 2
Which
two options allow a Cisco Unified Wireless IP Phone 7925G to conserve its
battery? (Choose two.)
A.
PS-Poll
B.
S-APSD
C.
U-APSD
D.
802.11h
E.
802.11r
Answer: A,C
Question: 3
Which
statement describes the benefit of WMM U-APSD over legacy 802.11 power-save
mode?
A.
Client can burst data without standard interframe spacing.
B.
Client can burst data without ACKs.
C.
Client no longer sends null frame to notify of sleep mode.
D.
Client sleep mode is scheduled by AP to reduce jitter.
Answer: A
Question: 4
Which
two items enable WMM to expedite frames from respective traffic categories?
(Choose two.)
Consistent
CWmin and CWmax values
Dynamic
CWmin and CWmax values
A.
AIFS
B.
SIFS
C.
PIFS
D.
DIFS
E.
U-APSD
F.
PS-Poll
Answer: B,C
Question: 5
When
a VoWLAN client is in the range of two cells, which two statements describe how
the client makes a decision about which cell is the best to associate with?
(Choose two.)
A.
The client will associate with the cell with the highest RSSI value.
B.
The client will associate with the cell with the lowest SNR value.
C.
The client will associate with the cell broadcasting the highest 802.11e value.
D.
The client will associate with the cell broadcasting the highest TSPEC value.
E.
The client will associate with the cell broadcasting the lowest mandatory date
rate.
F.
The client will associate with the cell broadcasting the highest data rate.
G.
The client will associate with the first cell that advertises U-APSD.
Answer: A,B
Question: 6
The
AP has been properly configured for a VoWLAN survey. The RF environment
contains a noise of -87 to -90 dBm. What would be the target value for the cell
edge reading?
A.
-55 dBm
B.
-60 dBm
C.
-62 dBm
D.
-67 dBm
E.
-70 dBm
F.
-73 dBm
Answer: C
Question: 7
What
is the recommended minimum speed at the edge of the cells in an 802.11g network
for a good Cisco VoWLAN deployment?
A.
11 Mb/s
B.
12 Mb/s
C.
18 Mb/s
D.
36 Mb/s
E.
54 Mb/s
Answer: B
Question: 8
Which
three statements are true about load-based Call Admission Control? (Choose
three.)
A.
grants a VoWLAN client-initiated call based on the number of active clients
associated to the AP
B.
grants a VoWLAN client-initiated call based on channel bandwidth capacity
C.
uses the 802.11i specifications
D.
uses ADDTS action frames
E.
requires a WMM-enabled client
Answer: B,D,E
Question: 9
Using
proper VoWLAN design practice, what would be a reasonable total number of calls
for a properly designed 802.11g cell to ensure call quality?
A.
4
B.
7
C.
14
D.
20
E.
25
F.
27
Answer: C
Question: 10
Using
proper VoWLAN design practice, what would be a reasonable total number of calls
for a properly designed 802.11a cell to ensure call quality?
A.
4
B.
7
C.
14
D.
20
E.
25
F.
27
Answer: D
Question: 11
A
VoWLAN site survey was performed and equipment installed based on recommended
design guidelines. Which two statements describe reasons to perform a
post-deployment survey? (Choose two.)
A.
There is insufficient information about the number of people in the area when
the survey is performed.
B.
There is insufficient information by AirMagnet VoFi Analyzer.
C.
There are elevator shafts.
D.
There are roaming pathways.
E.
There are changes in temperature in the indoor environment.
Answer: A,D
Question: 12
Which
attribute does the VoWLAN Readiness Tool of WCS v7.0 use to predict acceptable
conditions?
A.
SNR
B.
RSSI
C.
PER
D.
WMM
E.
QBSS
Answer: B
Question: 13
You
are deploying a combination of Cisco Unified Wireless IP Phones 7921G and 7925G
at your branch offices in a centralized call processing environment that
requires high availability at branch locations. Which three components need to
be verified before the wireless IP phones can be deployed? (Choose three.)
A.
Sufficient SRST license support at each branch location
B.
Support for local voice mail
C.
Branch gateways support MoH
D.
Properly configured QoS over the IP WAN links
E.
Support for single number reach
F.
Support for E.164 dialing
G.
Sufficient IP phone licenses in the Cisco Unified Communications Manager
cluster
Answer: A,D,G
Question: 14
You
have recently added Cisco Unified Wireless IP Phones 7921G and 7925G to your
branch office. The new wireless and wired IP phones are experiencing poor call
quality when receiving calls across the IP WAN from the remote HQ. What is the
most likely issue?
A.
The Cisco Unified Communications Manager bandwidth for the IP WAN link is not
properly configured and is allowing more calls than the link can accommodate.
B.
The Cisco Unified Communications Manager bandwidth settings have not been
increased to support the new wireless IP phones.
C.
The Cisco Unified Communications Manager bandwidth is set too low, resulting in
poor call quality.
D.
The Cisco Unified Communications Manager gatekeeper-controlled CAC has been set
too low, resulting in poor call quality.
Answer: A
Question: 15
Your
Cisco Unified Wireless IP Phones 7921G and 7925G are associated with the VoWLAN
at your branch office. When they attempt to place a call, the call fails to go
through and you receive a fast busy tone. What is the issue?
A.
The wireless phones failed to register with the Cisco Unified Communications
Manager cluster.
B.
The Cisco Unified Communications Manager cluster invoked CAC to preserve IP WAN
voice bandwidth.
C.
The local gateway rejected the call because of high IP WAN utilization.
D.
Automatic alternate routing has been invoked.
Answer: B
Test Information:
Total Questions: 188
Test Number: 642-742
Vendor Name: Cisco
Cert Name: CCNP Wireless
Test Name: CCNP Wireless - IUWVN
Official Site: http://www.certsgrade.com
For
More Details: http://www.certsgrade.com/pdf/642-742/
Get latest exam dumps with questions and answers to crack any IT Certification.
ReplyDeleteExam Dumps answers
Practice test pdf
exam certification
Prepare exam
questions answers
dumps pdf free download
certification dumps
management designer dumps
Practice questions